Fiyɛli fiyɛlan filiw ni a furajiw minnu bɛ sɔrɔ .

1. kan cogoya jugu .
Symptom: If the rotary nozzle works normally, there should be a smooth, transparent circular dense section of the water tongue near the nozzle when there is no other obstruction. After the dense section, the water tongue gradually turns white and is crushed. If the water tongue is rough, opaque, or scattered as soon as it leaves the nozzle, it indicates abnormal water tongue jogo.
Kun ni furakɛli:
Ji kan bɛ gɛlɛya ani ka kɛ opaque ye ni a bɔra nozzle sanfɛ dɔrɔn, nka a kunba ye sɛrɛkili ye hali bi: a kun ye ko nozzle baara bɛ gɛlɛya, ni burrs walima tiɲɛni ye. Nozzle ka kan ka polisi walima ka a bila a nɔ na.
As soon as the water tongue leaves the nozzle, it disperses without a circular dense section: the main reason is that the nozzle is severely damaged internally, the rectifier is twisted and deformed, or there are foreign objects blocking the flow channel. The nozzle should be inspected and replaced, the rectifier should be repaired or replaced, and foreign objects should be removed.
2. Ji kanw hakɛ dɔgɔyali .
Taamasiɲɛ: Yɔrɔ dafalen tɛ se ka sɔrɔ jiginni teliya kojugu fɛ walima baarakɛ tansiyɔn dafalen.
Kun ni furakɛli:
Range tɛ se, nka nozzle atomization ka ɲi: a sababu ye ko furaji fiyɛli teliya jiginni teliya kojugu, o la, nozzle ka wuli teliya ka kan ka dɔgɔya.
A ka ca a la, a ka kan ka kɛ ko a kun ye ko baara tansiyɔn tɛ se ka kɛ, wa ko degun bɛ se ka ladilan i n’a fɔ a ɲininen bɛ cogo min na.
3. Nozzle blocage .
Taamasiɲɛ : Nozzle blockage ye filiw dɔ ye minnu bɛ sɔrɔ tuma caman, a ka ca a la, nɔgɔw, ji dalajɛlen walima buguri bɛ kɛ fiɲɛbɔlan kɔnɔ, o bɛ fiɲɛ bila ji fiyɛli la.
Kun ni furakɛli:
Aw bɛ fiɲɛbɔlan saniya ni saniyalan ye ani ka a lajɛ ni nɔgɔ dɔw bɛ a la ka a bila fiɲɛ kɔnɔ. Aw bɛ a bila a nɔ na ni a mago bɛ a la.
Aw bɛ to ka fɛnɲɛnamafagalan saniya ani ka burusi walima pikirijikɛlan finman dɔ kɛ ka a datugu; Aw bɛ filɛri dɔ sigi walasa ka nɔgɔw bɔ saniya furaji la; Aw bɛ saniya furaji fɔlenw kɛ ani ka aw yɛrɛ tanga saniya furaw ma minnu tɛ bɛn walima minnu nɔgɔlen don kosɛbɛ. .
4. pibilikiw balili .
Taamasiɲɛ : A ka c’a la, pibiliki datuguli bɛ sɔrɔ ji, nɔgɔ walima bugunw dalajɛli fɛ pibiliki kɔnɔ, minnu bɛ ji bɔli bali.
Kun ni furakɛli:
Aw bɛ pibiliki saniya ni saniyalan ye ani ka a lajɛ ni nɔgɔ walima minɛnw datugucogo dɔw bɛ pibiliki kɔnɔ. Aw bɛ pibiliki wuli ni a mago bɛ o la.
5. Ji bɔli fili .
Taamasiɲɛw: Ji bɔli filiw bɛ se ka sɔrɔ kun caman fɛ, i n’a fɔ kuran bɔli walima ji bɔli.
Kun ni furakɛli:
Aw bɛ a lajɛ ni kuran bɛ don a la ka ɲɛ, ni ɲɔgɔn sɔrɔli man ɲi, ni nɛgɛw tiɲɛna, ani ka kuran juru falen ni a mago bɛ o la.
Ji bɔli bɛ sɔrɔ yɔrɔw tiɲɛni fɛ, u kɔrɔbayali fɛ, walima u yɔrɔw lajɛli ma ɲɛ i n’a fɔ fiɲɛw, pibilikiw, walima minɛnw. yɔrɔw lajɛ minnu bɛ tali kɛ o ko la ani ka u falen walima ka u lajɛ kokura ni a mago bɛ o la.
6. Mankan baarakɛbaliya .
A taamasiɲɛw: A ka c’a la, mankan bɛ sɔrɔ biriki sɛgɛn fɛ, fiɲɛbɔlanw sɛgɛn, ani ko wɛrɛw minnu bɛ sɔrɔ masinw fɛ i n’a fɔ motɛriw ni motɛriw.
Kun ni furakɛli:
Masina yɔrɔw ladonni ni u sɛgɛsɛgɛli tuma bɛɛ walasa ka tulu ɲuman sɔrɔ, ani ka yɔrɔw falen waati bɛnnen na.
7. Nozzle sɛgɛn ni a tiɲɛni .
Taamasiɲɛw: A tali kuntaalajan walima a kɛli ka caya, o bɛ se ka kɛ sababu ye ka fiɲɛ bila a la, ka a jira ko a bɛ kɛ ni fiɲɛ bɔli hakɛ caya ye ani ka dɔ bɔ a fiyɛli nɔ na.
Kun ni furakɛli:
Aw bɛ to ka fiɲɛ bila a la ani ka a falen joona ni a sɛgɛnna; Aw bɛ nozzle minɛnw sugandi minnu bɛ se ka sɛgɛn ka ɲɛ, i n’a fɔ seramiki walima silicon carbide; Aw bɛ saniya tansiyɔn ni ji bɔli hakɛ ladilan walasa ka aw tanga tansiyɔn ni jibɔ teliya ma ni fiɲɛ bilali teliya ye.
8. Nozzle leakage .
Taamasiɲɛ: Nɔgɔ bɔli bɛ se ka kɛ ni sigilanw kɔrɔya ye, tiɲɛni, walima sigilanw sigicogo jugu.
Kun ni furakɛli:
Aw bɛ to ka sigilanw lajɛ ani ka u falen joona ni kɔrɔya walima tiɲɛni sɔrɔla; Aw bɛ aw jija ka fiɲɛ bila ka ɲɛ walasa aw kana a siri kojugu walima ka a sigili sabati min tɛ sabati.
9. Spray angle deviation .
Taamasiɲɛ : fiyɛlilan yɔrɔ jiginni bɛ se ka sɔrɔ a sigicogo jugu fɛ, a kɛnɛma sɔgɔli, walima a baara waati jan.
Kun ni furakɛli:
Aw bɛ to ka fiɲɛbɔlan in sigicogo lajɛ walasa a ka bɛn magoɲɛfɛnw ma; Aw bɛ aw yɛrɛ tanga kɛnɛma nɔ ma fiɲɛbɔlan na ani ka a lajɛ ni a bɛ baara kɛ sigida la min tɛ mɔgɔ tɔɔrɔ.
10. NOZZE DETACHE TILE DILE .
Taamasiɲɛw: Nozzles minnu bɛ lafiya walima minnu bɛ bɔ u la, olu bɛ se ka sɔrɔ u sigili la, ni jiri tiɲɛnenw ye, walima ni u yɛrɛyɛrɛli bɛ mɛn.
Kun ni furakɛli:
Aw bɛ baara kɛ ni da tugulanw ye walima ka anti lajɔli kolanw kɛ walasa ka jiriw sirili nɔ bonya; Aw bɛ to ka fiɲɛbɔlan sigicogo lajɛ walasa a ka sabati ani a ka dannaya sɔrɔ.